1. Comes with six, 48" 18 gage galvanized, steel legs, black powder
coated with a 6” interlocking swage, to provide additional strength
and support.

2. Legs are constructed and mounted at the proper angle, so that 2/3
of the feeder is below center of gravity, maximizing the stability of the
feeder.

3. Assembled feeder height is 7.5 feet, making it easy to fill from the
back of a pickup truck. Extensions are available for increasing the
height of the feeder.

4. Attached feet come with a 3/8" hole, with four 7/16 x 8"stakes to
further secure and stabilize the feeder.

1. Comes with a limited lifetime warranty on the motor, and a limited
2-year warranty on all other components. (rubber gasket, lid clips,
and battery have a one-year warranty).

2. Comes complete with a Premium grade 12v rechargeable battery,
that will last 14-16 months before recharging. (Recharging the battery
  every 12 months with proper charger will help extend the battery life.)
     A $35.00 value.

         3. The high performance motor has a 6" x 5/16” stainless steel
            shaft, that will deliver an even spread pattern up to a 120-foot
               radius, without dumping excess feed under the feeder. This
                  also allows more animals and a variety of different animals
                     that may compete with each other, to feed at the same time.

                        4. Components (timer, motor, and battery) are mounted
                             internally to help shield them from all weather
                                 conditions. Click here

                               5. The stainless steel spinner plate can be adjusted
                                  up or down, to accommodate different types and
                                    amounts of feed, even when the feeder is full,
                                       Also allowing the feeder to be emptied by doing
                                          nothing more than removing the stainless steel
                                            spinner plate.

6. Has a uniquely designed high impact funnel that eliminates the
feed from collecting within the feeder allowing you to refill at your
convince, so there is no lapse in your feeding program.

7. Comes with a galvanized lid designed to shed water not hold water.
Held in place by three easy on/off stainless steel latches. The lid is
sealed to the barrel with a molded rubber gasket to protect your feed
from rain and moisture.