1. Comes with 3 sturdy 1" channel steel legs that are
black
powder coated to prevent them from rusting. The legs also protect
the spinner plate and cone when transporting or lowering the feeder.
2. Comes with a hanging bar with 3/8" quick link shackle
that has
been tested and certified to a break strength of 1600 lb. This allows for
secure and easy hanging.
1. Comes with a limited lifetime warranty on the motor, and
a limited
2 year warranty on all other components. (rubber gasket, lid clips,
and battery have a one-year warranty).
2. Comes complete with a Premium grade 12v rechargeable battery,
that will last 14-16 months before recharging. (Recharging the battery
every 12 months with proper charger will help extend the battery life.)
A $35.00 value.
3. The high performance motor has a 6"x
5/16"stainless steel
shaft, that will deliver an even spread pattern
up to a 120-foot
radius, without dumping excess feed
under the feeder. This
also allows more animals
and a variety of different animals
that
may compete with each other, to feed at the same time.
4.
Components (timer, motor, and battery) are mounted
internally to help shield them from all weather
conditions. For detailed feeder components Click
here
5.
The stainless steel spinner plate can be adjusted
up or down, to accommodate different types and
amounts of feed, even when the feeder is full,
Also allowing the feeder to be emptied by doing
nothing more than removing the stainless steel
spinner plate.
6. Has a uniquely designed high impact funnel that eliminates
all
feed from collecting within the feeder allowing you to refill at your
convince, so there is no lapse in your feeding program.
7. Comes with a galvanized lid designed to shed water not
hold water.
Held in place by three easy on/off stainless steel latches. The lid is
sealed to the barrel with a molded rubber gasket to protect your feed
from rain and moisture.
